Working principle of automobile alternator

The working principle of automobile alternator is that the stator and rotor of the generator are connected and assembled by the bearing and end cover, so that the rotor can rotate in the stator and cut the magnetic line of force, so as to generate induced potential, which is led out through the wiring terminal and connected in the circuit to generate electric current. The following is the relevant introduction: the generator is a mechanical equipment that converts other forms of energy into electrical energy. The alternator can also be divided into single-phase generator and three-phase generator. The generator is driven by water turbine, steam turbine, diesel engine or other power machinery,

After the engine is started, the terminal voltage of the generator increases with the increase of motor speed. When the generator output voltage is equal to the accumulator output voltage, the potentials of generator terminals ` B 'and ` d' are equal. At this time, the charging indicator is off because the difference between the two terminals is zero.

The dynamic characteristics of a vehicle refer to the process of driving along a straight line on a good road, which can be determined by the longitudinal force and meet the requirements of the average driving speed. From this definition, we can see that for a road, it must be good, horizontal or inclined, and the way of movement can take a straight line.

The seat is also one of the most important parts of the car body. The valve seat is composed of a frame, a seat cushion, a backrest and an adjusting mechanism. The cushion and backrest should have some flexibility. The adjusting mechanism allows the seat to move back and forth or up and down, and adjusts the inclination angle of the seat cushion and backrest. Some seats also have flexible suspension and shock absorber, which can adjust the seat cushion to keep the driver away from the ground under different weights.